Refer to information below for detailed specifications
Reference Cell / Electrode
ICCP systems are controlled to assure optimum protection. This control is obtained by inserting a third electrode between the anode and the cathode. The third cell/electrode is insulated and does not receive any anode current. This cell/electrode is freely corroding and it becomes the starting point — or reference — in eliminating corrosion. Cell/Electrodes constructed of Zinc are used exclusively with the ICCP system.
Zinc Reference Electrode
Power Supply Unit / Control Panel
Each standard ICCP system utilizes a solid-state controller which monitors and controls the protection as measured by the Zinc Referance electrode. Anode current automatically increases when the electrode potential falls below the designated control value. An over- and under-potential alarm is provided with the system package. We also offer optional digital control, state-of-the-art technology with every system. The computer controller (shown below is more accurate and provides central control, monitoring, data storage and hard printout.
Mixed Metal Oxide Anodes
Mixed Metal Oxide anodes of are used exclusively for ICCP systems. ICCP anodes are manufactured in Linear Loop, Elliptical and Circular designs with insulating holders. They are available in a single unit capacity of 75 to 225 amperes, as required for various installations.